Gentex 710CS

Gentex 710CS

Related Products
Product Videos
Manuals & Resources
Also Viewed
By Category
Other Details
  • Product Description



    User Guide
    Product Brochure

    Gentex 710CS

    The 710CS smoke detector is a hard wired smoke detector.
    NOTE: Designed for lodging facilities.

    The 710CS photoelectric single/multiple station smoke alarms are designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. The series features a 90dBA solid state piezo signal and a 177 Candela strobe with “FIRE” lettering. The strobe is listed per UL 1971.

    The smoke alarm operates on the light scattering principle, a superior method of detection in smoldering fires, utilizing a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber.

    Every 4 to 5 seconds the pulsing LED emits an infrared beam that by passes the photodiode under normal conditions. However, when smoke enters the sensing chamber, the infrared beam is deflected onto the sensor by the smoke particles. The LED pulse rate increases to 8 times the normal rate, and after the photodiode confirms that smoke is present for 2 consecutive pulses, it will produce the signal necessary to trip an alarm.

    Upon activation, the alarm will emit a 90dBA local audible signal and activate the high intensity strobe. During the alarm period the strobe will flash at a brightness of 177 candela 60 times per minute. After the smoke has cleared from the detector, the unit will revert to the normal stand-by condition.

    Standard Features

    • Available in 120VAC
    • 177 candela rating (UL 1971 listed)
    • Horn frequency 3100Hz (nominal)
    • Patented three position test switch
    • Nominal 2.5% Sensitivity
    • Quick-Disconnect Wiring Harness
    • Form C Auxiliary Relay Contacts for Remote Annunciation
    • Relay Contacts Will Activate From the Tandem Wire
    • 90dBA Continuous Piezo Horn
    • 5-to-1 Signal-to-Noise Ratio 
    • Fully Insect Screened
    • Interconnect with all Gentex tandem capable smoke alarms
    • Interconnect up to 6 Alarms
    • Mounting Hardware Adapts to Standard Junction Boxes
    • Warranty is 1 Year From Date of Purchase
  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Related Products

  • Find Similar Products by Category